Pipe Base Screen
Our pipe base screens are manufactured on international standards. The screen jackets are manufactured by spirally wounding narrow faced V-Wire around a cage of longitudinal support rods. Each intersection point of these wires is fusion welded.
Key word:
Category:
Screen Pipe
Pipe Base Screen
Our pipe base screens are manufactured on international standards. The screen jackets are manufactured by spirally wounding narrow faced V-Wire around a cage of longitudinal support rods. Each intersection point of these wires is fusion welded. These jackets are then mounted over seamless pipe(API Casing, tubing) which is perforated as per international standards or by client's request to ensure flow performance, and then both ends of jacket are welded on to the seamless pipe.
Feature
1.High flow capacity. The jacket is made of V- wire,that allows more water or oil to enter in, at much lesser frictional loss and the efficiency of well is improved appreciably.
2.Perfect integral strength and strong anti-deformation ability .The internal part of filtration jacket is supported by base pipe and the outer protective shroud can be fixed outside the filtration jacket if necessary. The integral strength of base pipe with drilled holes is merely 2~3% less than standard casing or tubing. So it can withstand compression deformation from stratum with sufficient integral strength. Even if local deformation occurs, the gap of compressed part will not be enlarged. It has been proved to be highly reliable on sand control.
3.More choice: The screen jacket material can be stainless steel or low carbon steel,according to client's requirements.
4.Slot with high density, low flow resistance .Slot density are 3~5 times as traditional slotted screen, with low flow resistance. It is conducive to increase production of oil or gas.
5.Good manufacturability makes high efficiency, low cost, and large-scale production achievable.
Technical Specification
BASE PIPE | SLIP ON SCREEN JACKET | |||||||||
Nominal Diameter | Pipe OD (mm) | Weight lb/ft WT (mm) | Hole size IN | Holes per Foot | Total Area of Holes in^2/ft | Screen OD(in) | Open Area of Screen in2/ ft, | |||
0.008'' | 0.012'' | 0.015'' | 0.020'' | |||||||
2-3/8 | 60 | 4.6[4.83] | 3/8 | 96 | 10.6 | 2.86 | 12.68 | 17.96 | 21.56 | 26.95 |
2-7/8 | 73 | 6.4[5.51] | 3/8 | 108 | 11.93 | 3.38 | 14.99 | 21.23 | 25.48 | 31.85 |
2-1/2 | 88.9 | 9.2[6.45] | 1/2 | 108 | 21.21 | 4.06 | 18 | 25.5 | 30.61 | 38.26 |
4 | 101.6 | 9.5[5.74] | 1/2 | 120 | 23.56 | 4.55 | 20.18 | 28.58 | 34.3 | 42.88 |
4-1/2 | 114.3 | 11.6[6.35] | 1/2 | 144 | 28.27 | 5.08 | 15.63 | 22.53 | 27.35 | 34.82 |
5 | 127 | 13[6.43] | 1/2 | 156 | 30.63 | 5.62 | 17.29 | 24.92 | 30.26 | 38.52 |
5-1/2 | 139.7 | 15.5[6.99] | 1/2 | 168 | 32.99 | 6.08 | 18.71 | 26.96 | 32.74 | 41.67 |
6-5/8 | 168.3 | 24[8.94] | 1/2 | 180 | 35.34 | 7.12 | 21.91 | 31.57 | 38.34 | 48.8 |
7 | 177.8 | 23[8.05] | 5/8 | 136 | 42.16 | 7.58 | 23.32 | 33.61 | 40.82 | 51.95 |
7-5/8 | 194 | 26.4[8.33] | 5/8 | 148 | 45.88 | 8.2 | 25.23 | 36.36 | 44.16 | 56.2 |
8-5/8 | 219 | 32[8.94] | 5/8 | 168 | 51.08 | 9.24 | 28.43 | 40.98 | 49.76 | 63.33 |
9-5/8 | 244.5 | 36[8.94] | 5/8 | 188 | 58.28 | 10.18 | 31.32 | 45.15 | 54.82 | 69.77 |
10-3/4 | 273 | 45.5[10.16] | 5/8 | 209 | 64.79 | 11.36 | 34.95 | 50.38 | 61.18 | 77.86 |
13-3/8 | 339.7 | 54.5[9.65] | 5/8 | 260 | 80.6 | 14.04 | 37.8 | 54.93 | 66.87 | 85.17 |
NOTE :The length of base pipe and the diameter and the slot of screen could as per customer’s requirement.
PREV
NEXT
PREV
Wedge Wire Screen
NEXT
PRODUCT MESSAGE