Cangzhou Ruitai Petroleum Machinery Co., Ltd
language
English
العربية
বাংলাদেশ
Български
Hrvatski
Česky
Dansk
Nederland
Esperanto
Slovenski
Filipino
Suomi
Français
Maori
Shqiptare
Georgian
Euskara
Deutsch
Ελλάδα
ישראל
इंडिया
Magyarország
Ísland
Indonesia
Irlanda
Italia
日本語
Sovensko
Հայաստան
한국
Kyrgyz
ປະເທດລາວ
Zulu
Latvian
Lithuanian
Luxembourgish
Latinus
Macedonian
Малайская
Maltese
Монгол улс
Cymraeg
ဗမာ
தமிழ்
नेपाल
Norge
ایران
Polska
Portugal
România
Российская
Србија
Slovak
Србија
Slovak
Bosanski
Slovenian
Беларус
España
Sverige
Точик
ประเทศไทย
Türk
Azərbaycan
Uzbek
Afrikaans
Việt Nam
Contact
A crossover sub is used to crossover from one connection size to another or as the disposable component used to extend the connection life of a more expensive drill stem member. Cross-over sub is mainly a short sub assembly which is used to enable the connection of two components with differing thread types or sizes.
The continuous-slot well screen is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry.
Precise Punched Slot Screen (PPS)
PPS screen is a proven screen technology with high performance for sand control and is an upgraded technological alternative for slotted liner and wire-wrapped screen. It is also suitable for coarse sandstone formations and open hole horizontal wells.
Couplings are short subassemblies used to enable two components with the same connection and size to be connected. Couplings are also known as loose coupling and spare coupling.
Pup joints are non-standard lengths of piping used to adjust the height of full length tubing, or casing strings.
TypeZR70-1 Direct wire-wound screen pipe Machine
Directly wire-wound screen pipe machine is a large mechanical equipment for processing wound screen pipe. With this equipment ,the wire can be directly wounded & welded on the peforated casing. It has the characteristic of high processing accuracy and good welding synchronization.
Type PZ160-1 Row drilling machine
Row drilling machine is a large mechanical equipment to drill holes on oil casing; The PZ160-1 row drill machine can drill casings up to 11.5 m with the hole maximum diameter of 16 mm.
CY16018-1 Automatic stamping production line
CY16018-1 stamping production line is a machine for automatic stamping and forming of coils,which can stamp carbon steel and stainless steel, and the maximum stamping width is ≤ 202mm.
It is composed of base pipe, fully welded wire wound screen pipe and welding ring. The base pipe is made by drilling casing or oil pipe conforming to AP standard, and the full welded wire wound screen pipe is welded with the base pipe through welding ring.
It is composed of base pipe, fully welded wire wound screen pipe and welding ring. The base pipe is made by drilling casing or oil pipe conforming to AP standard, and the full welded wire wound screen pipe is welded with the base pipe through welding ring.
The bridge type slot punching screen pipe is composed of a central pipe, a bridge type slot punching sleeve and a stainless steel ring. It has precisely controllable pores, large flow area, high overall strength, strong deformation resistance, excellent corrosion resistance, high reliability, etc.
The bridge type slot punching screen pipe is composed of a central pipe, a bridge type slot punching sleeve and a stainless steel ring. It has precisely controllable pores, large flow area, high overall strength, strong deformation resistance, excellent corrosion resistance, high reliability, etc.