Tubing is the pipe that goes into the oil casing of the oil well under normal production.

Tubing is the pipe that goes into the oil casing of the oil well under normal production. In the flowing well, oil flows into the ground through tubing and enters the gathering and transportation process. In mechanical production wells, oil pipes, sucker rods and deep well pumps (i.e. "three pumping" machines and equipment) are used to pump oil out of the ground and into the gathering and transportation process.

Where are the casings in the oil well

Tubing is the pipe that goes into the oil casing of the oil well under normal production. In the flowing well, oil flows into the ground through tubing and enters the gathering and transportation process. In mechanical production wells, oil pipes, sucker rods and deep well pumps (i.e. "three pumping" machines and equipment) are used to pump oil out of the ground and into the gathering and transportation process.

Inspection Key Points For Round Thread Casing,Tubing, And Buttress Thread Casing

All instruments shall be exposed to the same temperature conditions as the product to be inspected, for a time sufficient to eliminate temperature difference.

Inspection method of casing & tubing in mill.

API tubing is inspected at the mill in accordance with API Spec. 5CT. Physical properties are checked and each length hydrostatically tested to required pressure condition.

Brief Introduction of OCTG (Casing & Tubing)

OCTG is the abbreviation of Oil Country Tubular Goods, it mainly refers to the piping products that applied in the oil and gas production (drilling activities).

The material and selection of Sloatted Casing

Sloatted Casing mainly has these three materials: PE (polyethylene), PP (polypropylene) and PA (nylon), which can meet the high temperature requirement of 150 ℃, there are two kinds of materials: PP and PA. The following mainly introduces these two materials. The material difference and application selection of Sloatted Casing.

BTC Casing supplier tells you what Casing is

BTC Casing supplier tells you that Casing is an insulating device that introduces live conductors into electrical equipment or through walls. The former is called electrical bushing, and the latter is called wall bushing.

Is Wire Warp Casing Important?

When installing home improvement wires, the wires are generally threaded into the Wire Warp Casing. Some construction workers want to save a little trouble and will directly fix the bare wires during the ceiling construction. There is no sleeve, so is it safe for the wire to be uncased? ?

What does Wire Warp Casing do?

Today I will explain to you the function of Wire Warp Casing. 1. It is convenient to pull out the wire in the future If the wires are directly buried in the cement mortar, this will become a "dead line". If it is necessary to perform line maintenance, replacement, and home intelligent equipment in the later stage, it will be impossible.